Unmatched performance and reliablity for the most demanding mission-critical applications

Reliablity: The Zebra Advantage

For nearly 30 years, every Zebra printer has been designed, engineered and constructed with quality and durability in mind. This ongoing dedication to excellence is how we've earned our reputation for proven reliablity. Click on picture for specifications.

Your Zebra printer will deliver the results you expect: enhanced productivity, minimal maintenance, and a lower cost of ownership. We even back up every product with a 12-month printer warranty and 6-month printhead warranty, with no limitation on inches printed.

Common applications:

105se Quick Specs
	Prints at 203dpi (8 dots/mm)
	Prints labels up to 6.3" (160mm) wide
	Prints labels up to 24" (609mm) long at 6.0"/sec (152mm/sec)
	Direct Thermal and Thermal Transfer printing

• Chemical drum labels
• Large paper roll labeling
• Clinical lab label sets
• Primary metal standard labels
• ODETTE labels for the automotive industry
• Banner-sized labels
• Pallet and shipping labels
• Container labels
• Multiple-across labels

Zebra Service & Support

Owning a Zebra printer opens the door to a myriad of resources, giving you ready access to information, advice and answers

• Superior documentation
• Dedicated technical support line
• Worldwide network of certified service providers

Expert assistance is as close as your phone or fax. And with Zebra's Internet Product Support (ZIP Support), interactive technical support is only a click away. All day, everyday.

Click here for more information on the Zebra 105se Thermal Bar Code Label Printer

Printing Specifications

• Thin film printhead with Energy Control
• Thermal transfer or direct thermal printing:
  • standard 203 dots/inch (8 dots/mm);
  • optional 152 dots/inch (6 dots/mm) or 300 dots/inch (12 dots/mm) resolution
• Maximum print width: 4.09"(104mm)

Media Dimensions

• Minimum label width: 0.79" (20mm)
• Maximum label width: 4.52" (115mm)
• Minimum label length: 0.5" (12mm) in rewind and peel modes, 0.63" (16mm) in tear- off mode, and 1.5" (38mm) in cutter mode
• Maximum print length:
  16.0" (406mm) 300dpi
  (w/std. mem.) 12.0" (304mm) 203dpi
  (w/std. mem.) 22.0" (558mm) 152dpi
• Total thickness (label and liner): 0.003" (0.076mm) to 0.012" (0.304mm)
• Maximum label roll diameter(OD): 8.0" (203mm)
• Media core inside diameter: 3.0" (76mm)
• Standard transmissive media sensing (label gap/notch)

Ribbons

• Maximum outside diameter: 3.2" (81mm)
• Ribbon core inside diameter: 1.0" (25.4mm)
• Width range: 0.79" (20mm) to 5.31" (134.8mm)

Print Speeds

• Programmable constant printing speeds of 2" (51mm), 3" (76mm), 4" (102mm), 5" (127mm) and 6" (152mm) per second
• Speeds with optional 300dpi printhead are 2.4" (61mm), 3" (76mm) and 4" (102mm) per second

Printer Programming Options

• ZPL II or ZPL (selectable through software)
• Zebra printer driver for Windows operating system
• BAR-ONE Windows-based WYSIWYG on-screen label design application software
• PC-470 print controller with keyboard and display for stand-alone applications

Fonts

• 7 bitmapped, 1 scalable (CG Triumvirate Bold Condensed)
• IBM Code Page 850 International Characters
• Optional fonts: available on EPROM as scalable or smooth bit-mapped fonts in standard, bold, italic and bold italic
• Futura, CG Triumvirate Condensed, CG Palacio, CG Times or Univers character sets

Bar Codes/Symbologies

Electronics

• 32-bit microprocessor

Electrical

• Switch selectable 115 VAC +15/-20%,
• 5 amp fused; 230 VAC +/-15%, 3 amp fused (48-62Hz)

Communications Interface

• Centronics parallel or RS-232C serial ports, 110-19.2kB configurable BAUD rate, parity, data bits, XON-OFF/DTR protocol

Physical

• Height: 15.4" (391mm)
• Width: 10.5" (267mm)
• Depth: 18.9" (480mm)
• Weight without options: 43 lbs (19.5kg)

Environment

• Operating temperature: 41?F (5?C) to 104?F (40?C)
• Operating humidity 20-85% non-condensing
• Storage/transportation: -40?F (-40?C) to 158?F (70?C), 20% to 85% non-condensing R.H.

Options

• Label peel and liner rewind (for print-and-apply)
• Rewind (full label roll is rewound internally)
• Memory (standard 0.5 MB DRAM expand-able to 1MBstandard with 300dpi option)
• High-performance cutter cuts full-width media, under software control (not compatible with rewind and peel options)
• Printhead 152.4 dots-per-inch (6 dots/mm) resolution
• Printhead 300 dots-per-inch (12 dots/mm) resolution
• Internal Fan-fold Media Supply Bin (not compatible with internal rewind or peel options)
• Additional scalable and smooth bit-mapped fonts
• Reflective (black mark) media sensor (in addition to standard transmissive sensor), switch selectable
• BAR-ONE label design software